Join The Discussion

 

Dallas Fed's Fisher, Philadelphia Fed leaders to retire in 2015

WASHINGTON — The outspoken president of the Federal Reserve Bank of Philadelphia will step down in March, shortly before the central bank is expected to raise interest rates for the first time since the recession, the regional bank said Monday.

read more >

RadioShack sees stock jump on investment report

Fort Worth-based RadioShack saw its stock increase as much as 45 percent on Friday as investor Standard General LP said it was continuing talks on new financing for the electronics retailer.

read more >

Fort Worth couple gets in 'Shark Tank,' comes out with deal

A Fort Worth couple who started a business when they couldn’t sleep, were the first entrepreneurs to get a deal on ABC’s Shark Tank in the season premiere on Sept. 26.

read more >

Internal audit says EPA mismanaged Fort Worth project

FORT WORTH, Texas (AP) — An internal audit by the U.S. Environmental Protection Agency reveals the agency mismanaged an experiment using new ways to demolish asbestos-ridden buildings.

read more >

Weatherford's Wild Mushroom to open in Fort Worth's Ridglea Village

Weatherford restaurant staple The Wild Mushroom Steak House & Lounge will be coming to Fort Worth in November, moving into the former site of Ray’s Steakhouse at to 3206 Winthrop Ave. in the Ridglea Village Shopping Center.

read more >

Texas company makes metal gun with 3-D printer

A Texas company says it has made the first metal gun using a 3-D printer, taking the debate over people's emerging ability to create their own firearms to a new level. Solid Concepts, a specialty manufacturing company, said in a blog post it has fired more than 50 rounds from the handgun, even hitting a few bull's-eyes at more than 30 yards.
Credit: Courtesy Solid Concepts

Doug Gross

CNN

(CNN) -- A Texas company says it has made the first metal gun using a 3-D printer, taking the debate over people's emerging ability to create their own firearms to a new level.

Solid Concepts, a specialty manufacturing company, said in a blog post it has fired more than 50 rounds from the handgun, even hitting a few bull's-eyes at more than 30 yards.

The pistol is a version of an M1911, a handgun designed by John Browning and first used widely in the latter stages of combat stemming from the Philippine-American War. It's built from 33 mostly stainless-steel parts and has a carbon-fiber handgrip carved with a laser.

"The 3-D-printed metal gun proves that 3-D printing isn't just making trinkets and Yoda heads," the company said in the blog post.

Solid Concepts went out of its way Friday to point out that producing the metal gun isn't meant to advance a trend that worries law enforcement and some politicians. As 3-D printers become more widespread and affordable, some envision a near future in which criminals can crank out untraceable weapons without having to leave their homes.

"Let me start out by saying one, very important thing: This is not about desktop 3-D printers," Alyssa Parkinson, a spokeswoman for the company, wrote in the blog post.

The metal gun wasn't a move toward making firearms with a 3-D printer cheaper or more accessible, she wrote.

Basic 3-D printers, such as the MakerBot Replicator 2, can be bought for around $2,000. But Solid Concepts used a specialized, high-end printer whose cost would be out of reach of most people.

"The industrial printer we used costs more than my college tuition (and I went to a private university)," Parkinson said. "And the engineers who run our machines are top of the line; they are experts who know what they're doing and understand 3-D printing better than anyone in this business."

Solid Concepts wanted to show that 3-D printing is more than just hobbyists churning out plastic doodads -- it's a viable option for serious commercial use.

"It's a common misconception that 3-D printing isn't accurate or strong enough, and we're working to change people's perspectives," Kent Firestone, a vice president at the company, said in a statement.

In May, a nonprofit group, also from Texas, stirred far more controversy when it posted a video of the live firing of a plastic handgun created with a 3-D printer.

Cody Wilson, a 25-year-old self-described anarchist, posted instructions on how to make the gun online through his nonprofit group, Defense Distributed.

Those instructions were taken down after the U.S. State Department sent the group a cease-and-desist letter. The group's website was shut down shortly afterward.

Solid Concepts is a licensed firearm manufacturer. It said one use for its new capabilities with 3-D printers may be selling replacement parts for handguns.

< back

Email   email
hide
Arena
What do you think of the new plans for a new Will Rogers arena and changes at the Convention Center?